Tubular Batteries are designed and manufactured by us as per international quality standards and are available at most competitive market price. It is known for better performance and long service life even under demanding usage conditions.
1. Completely sealing throughout the batteries life.
2. Service life up to 18-20 years in continuous float operation down to approx. 80% capacity.
3. Gel electrolyte.
4. Low gassing thanks to antimony-free alloy and internal oxygen recombination.
5. Minimum space required and room requirements are minimal e.g. no washing facilities needed, ventilation requirements are minimal.
6. Easy to move and handle.
7. Easy install using cable connectors with insulated terminal covers.
8. Ready for immediate use without further commissioning work.
9. Can be supplied as a standard vertical installation or by special request, for a horizontal installation.
10. Very low self-discharge <50% of rated capacity in 2 years at 20 ℃ ambient temperature.
11. High cyclic ability over 400 cycles when discharged at 10 hour rate to an end voltage of 1.8Volt/cell at 20.
12. Deep discharge protected, a load can be connected to the battery for up to 4weeks.
13. No internal short circuits possible due to the gel structure.
14. No acid stratification, so no equalizing charge necessary.
The tubular battery is used in the following applications: UPS systems where power demand is for longer period, Inverters under same conditions, Solar PV systems, Telecom applications - both Base stations and at Repeater stations, Backup systems in Power stations and Sub stations and Switch yards, Railways signaling use, etc
After reading this post, I think you have understood some basic information about these deep cycle batteries. Of course, this is just a little and more useful tips will be written in this blog. When you visit it next time, you will find it has updated another new post.
没有评论:
发表评论